Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
OSPF and OSPFv3
392
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure the OSPFv3 Virtual Link
To configure the OSPFv3 virtual link:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing > OSPFv3 > Advanced > Virtual Link Configuration.
LSA Type
(continued)
(continued)
•
Inter-Area Router LSA
. This type describes a prefix external to
the area, yet internal to the autonomous system. It is originated by
an area border router.
an area border router.
•
AS-External LSA
. This LSA type describes a path to a prefix
external to the autonomous system and is originated by an
autonomous system border router.
autonomous system border router.
•
Link LSA
. A router originates a separate link LSA for each
attached link. It provides router's link local address to routers
attached to the link and also inform them of a list of IPv6 prefixes to
associate with the link.
attached to the link and also inform them of a list of IPv6 prefixes to
associate with the link.
•
Intra-Area-Prefix LSA
. A link's designated router originates one or
more intraarea-prefix LSAs to advertise the link's prefixes
throughout the area. A router can originate multiple
intra-area-prefix LSAs for a given area to advertise its own prefixes
and those of its attached stub links.
throughout the area. A router can originate multiple
intra-area-prefix LSAs for a given area to advertise its own prefixes
and those of its attached stub links.
LS ID
The link state ID identifies the piece of the routing domain that is being
described by the advertisement. The value of the LS ID depends on the
advertisement's LS type.
described by the advertisement. The value of the LS ID depends on the
advertisement's LS type.
Age
The time since the link state advertisement was first originated, in
seconds.
seconds.
Sequence
The sequence number field is a signed 32-bit integer. It is used to
detect old and duplicate link state advertisements. The larger the
sequence number, the more recent the advertisement.
detect old and duplicate link state advertisements. The larger the
sequence number, the more recent the advertisement.
Checksum
The checksum is used to detect data corruption of an advertisement.
This corruption can occur while an advertisement is being flooded, or
while it is being held in a router's memory. This field is the checksum of
the complete contents of the advertisement, except the LS age field.
This corruption can occur while an advertisement is being flooded, or
while it is being held in a router's memory. This field is the checksum of
the complete contents of the advertisement, except the LS age field.
Table 147. Advanced OSPFv3 External Link State Database Table (continued)
Field
Description