Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Multicast Routing
430
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
10.
Click the Add button.
The static RP address is added for one or more multicast groups
11.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure Multicast Static Routes
To configure multicast static routes:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing
> Multicast > Static Routes Configuration.
6.
In the Source IP field, enter the IP address that identifies the multicast packet source for the
entry you are creating.
7.
In the Source Mask field, enter the subnet mask to be applied to the source IP address.
8.
In RPF Neighbor field, enter the IP address of the neighbor router on the path to the
source.
9.
In the Metric field, enter the link state cost of the path to the multicast source.
The range is 0 to 255, the default is 1. You can change the metric for a configured route
by selecting the static route and editing this field.
by selecting the static route and editing this field.
10.
Click the Add button.
The static route is added to the switch.
11.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.