Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Multicast Routing
433
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure the IPv6 PIM Global Settings
To configure the IPv6 PIM global settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing
> IPv6 Multicast > IPv6 PIM > Global Configuration.
6.
Select an Admin Mode radio button.
The options are Disable, or the protocol variant of PIM option, dense mode (PIM-DM) or
sparse mode (PIM-SM).
sparse mode (PIM-SM).
By default, this setting is disabled. The Disable option sets the administrative status of
PM in the router to active or inactive.
PM in the router to active or inactive.
7.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Expiry Time (hh:mm:ss)
The time in seconds before this entry ages out and is removed from the
table.
table.
RPF Neighbor
The IP address of the reverse path forwarding (RPF) neighbor.
Protocol
The multicast routing protocol which created this entry. The possible
values are as follows:
values are as follows:
•
PIM-DM
•
PIM-SM
Flags
The value displayed in this field is valid if the multicast routing protocol
running is PIM-SM. The possible values are RPT or SPT. For other
protocols a – (hyphen) is displayed.
running is PIM-SM. The possible values are RPT or SPT. For other
protocols a – (hyphen) is displayed.
Table 169. Multicast Mroute Table (continued)
Field
Description