Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Netgear
  4. M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3
  5. Manual Do Utilizador

Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador

Download
Página de 700
Configure System Information 
45
 M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
9. 
In the Primary IP Subnet Mask field, enter the primary IPv4 subnet mask in dotted-decimal 
notation. 
This option is visible when IPv4 loopback is selected.
10. 
In the Secondary IP Address field, enter the secondary IP address in dotted-decimal 
notation. 
This input field is visible only when Add Secondary is selected. This option is visible 
when IPv4 loopback is selected.
11. 
In the Secondary Subnet Mask field, enter the secondary subnet mask for this interface in 
dotted-decimal notation.
This input field is visible only when Add Secondary is selected. This option is visible 
when IPv4 loopback is selected.
12. 
In the IPv6 mode field, enable IPv6 on this interface using the IPv6 address. 
This option is configurable before you specify an explicit IPv6 address. This option is 
visible when IPv6 loopback is selected.
13. 
Use the IPv6 Address field to enter the IPv6 address in the format prefix/length. 
This option is visible when IPv6 loopback is selected.
14. 
Use the EUI64 field to optionally specify the 64-bit extended unique identifier (EUI-64). 
This option is visible when IPv6 loopback is selected.
15. 
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect 
immediately.
Configure Management Interfaces
The Web management interface includes separate options for interface and port-based IP 
management. Port-based IP management disables VLAN-based (default/existing) IP 
management once you configure the port-based IP management and vice versa.
The source interface for applications is set to VLAN 1 by default. Changes in IPv4 
Management VLAN and port to a non-default value also sets the source interface to the 
VLAN 1 default VLAN/port automatically.
Configure the IPv4 Service Port
You can configure network information on the IPv4 service port. The service port is a 
dedicated Ethernet port for out-of-band management of the device. Traffic on this port is 
segregated from operational network traffic on the switch ports and cannot be switched or 
routed to the operational network.