Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Configure Quality of Service
462
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Packet processing begins by testing the class match criteria for a packet. A policy is applied
to a packet when a class match within that policy is found.
to a packet when a class match within that policy is found.
DiffServ Wizard Overview
The DiffServ wizard enables DiffServ on the switch by creating a traffic class, adding the
traffic class to a policy, and then adding the policy to the ports that you select. The DiffServ
wizard does the following:
traffic class to a policy, and then adding the policy to the ports that you select. The DiffServ
wizard does the following:
•
Creates a DiffServ class and defines match criteria used as a filter to determine if
incoming traffic meets the requirements to be a member of the class.
incoming traffic meets the requirements to be a member of the class.
•
Sets the DiffServ class match criteria based on traffic type selection as follows:
•
VOIP
. Sets the match criteria to UDP protocol.
•
HTTP
. Sets the match criteria to HTTP destination port.
•
FTP
. Sets match criteria to FTP destination port.
•
Telnet
. Sets the match criteria to Telnet destination port.
•
Every
. Sets the match criteria for all traffic.
•
Create a Diffserv policy and add it to the DiffServ class created.
•
If policing is enabled (that is, it is set to YES), the DiffServ policy style is set to simple.
Traffic that conforms to the class match criteria is processed according to the outbound
priority selection. The outbound priority configures the handling of conforming traffic as
follows:
Traffic that conforms to the class match criteria is processed according to the outbound
priority selection. The outbound priority configures the handling of conforming traffic as
follows:
•
High
. Sets the policing action to markdscp ef.
•
Med
. Sets the policing action to markdscp af31.
•
Low
. Sets the policing action to send.
•
If policing is disabled (that is, it is set to NO), all traffic is marked as follows:
•
High
. Sets the policy mark to ipdscp ef.
•
Med
. Sets the policy mark to ipdscp af31.
•
Low
. Sets the policy mark to ipdscp be.
•
Each port selected is added to the policy created.
Use the DiffServ Wizard
To use the DiffServ Wizard:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.