Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador

Select the TLS Version 1 Disable or Enable radio button

This enables or disables Transport Layer Security version 1.0. The currently configured 
value is displayed. The default value is Enable.

In the HTTPS Port field, type the HTTPS port number. 

The value must be in the range of 1025 to 65535. Port 443 is the default value. The 
currently configured value is displayed.

In the HTTPS Session Soft Timeout (Minutes) field, enter the inactivity time-out for 

HTTPS sessions. 

The value must be in the range of 1 to 60 minutes. The default value is 5 minutes. The 
currently configured value is displayed.

In the HTTPS Session Hard Timeout (Hours) field, set the hard time-out for HTTPS 

sessions. 

This time-out is unaffected by the activity level of the session. The value must be in the 
range of 1 to 168 hours. The default value is 24 hours. The currently configured value is 
displayed.

In the Maximum Number of HTTPS Sessions field, enter the maximum allowable number 

of HTTPS sessions. 

The value must be in the range of 0 to 16. The default value is 16. The currently 
configured value is displayed.

Click the Apply button. 

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

The Authentication List field displays the authentication list for HTTPS.

You can generate or delete certificates. 



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.

Select Security > Access > HTTPS > Certificate Management.