Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Configure System Information
59
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Time
The switch software supports the Simple Network Time Protocol (SNTP). As its name
suggests, it is a less complicated version of Network Time Protocol, which is a system for
synchronizing the clocks of networked computer systems, primarily when data transfer is
handled through the Internet.
suggests, it is a less complicated version of Network Time Protocol, which is a system for
synchronizing the clocks of networked computer systems, primarily when data transfer is
handled through the Internet.
Configure the Time Setting
To configure the time setting:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select System > Management > Time > Time Configuration.
6.
Select the Clock Source Local or SNTP radio button.
The default is SNTP. The local clock can be set to SNTP only if the following two
conditions are met:
conditions are met:
•
The SNTP server is configured.
•
The SNTP last attempt status is successful.
7.
In the Date field, specify the current date in months, days, and years.
8.
In the Time field, specify the current time in hours, minutes, and seconds.
9.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.