Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador

This enables or disables logging to configured syslog hosts. When the Admin Status is 
disabled, the device does not relay logs to syslog hosts, and no messages are sent to any 
collectors or relays. When the syslog Admin Status is enabled, messages are sent to 
configured collectors or relays using the values configured for each collector or relay.

Use Local UDP Port to specify the port on the local host from which syslog messages are 

sent. The range is 1 to 65535. The default port is 514.

Specify the Source Interface to use for syslog. 

Possible values are as follows:

None. When the None value is displayed, it means that the configured routing 
interface has become nonrouting.

Routing interface

Routing VLAN

Routing loopback interface

Tunnel interface

Service port

By default, VLAN 1 is used as source interface.

Use the USB Filename field to specify the name of the USB file. The filename cannot 

include the following symbols: V:*?”<>!. Up to 64 characters can be entered. The 64 

characters are only the filename length, the extension is automatically added. The default 

value is blank.

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

Syslog can write the log messages simultaneously to a remote server 
and the USB storage device.



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.