Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.

Select Monitoring > Mirroring > RSPAN Source Switch Configuration. 

Select the Session ID number from the list.

Select the Admin Mode True (enabled) or False (disabled) radio button for the selected 

session. 

When a particular session is enabled, any traffic entering or leaving the source ports of 
the session is copied (mirrored) onto the corresponding destination port or a remote 
switched port analyzer (RSPAN) VLAN. By default, Admin mode is False (disabled).

Select the RSPAN Destination VLAN from the list of available VLAN IDs.

Select the RSPAN Reflector Port from the list of reflector port interfaces.

Select from the Filter Type list to configure IP or MAC ACLs that can mirror traffic that 

matches a permit rule.