Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Configure System Information
72
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
11.
To specify the DNS server to which the switch sends DNS queries, enter an IP address in
standard IPv4 dot notation in the DNS Server Address field and click the Add button.
The server appears in the list. You can specify up to eight DNS servers. The precedence
is set in the order created.
is set in the order created.
12.
To remove a DNS server from the list, select its check box and click the Delete button.
If you click the Delete button without selecting a DNS server, all the DNS servers are
deleted.
deleted.
13.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
The following table displays DNS Server Configuration information.
Add a Static Entry to the Local DNS Table
You can manually map host names to IP addresses or to view dynamic DNS mappings.
To add a static entry to the local DNS table:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
Table 25. DNS Server Configuration
Field
Description
Serial No
The sequence number of the DNS server.
Preference
Shows the preference of the DNS server. The preference is determined
by the order in which they were entered.
by the order in which they were entered.