Netgear GS748TP – ProSAFE GS748TP 48-Port Gigabit Smart Switch and PoE Manual Do Utilizador

Configuring QoS

5-3

To configure CoS global parameters:

1. Click QoS > CoS > Basic > CoS Global Configuration. The CoS Global Configuration 

screen displays:

The CoS Global Configuration screen contains the following:

•

QoS Mode – Select whether QoS is enabled or disabled on the device. The possible values 
are:

–

Enable – Enable QoS globally.

–

Disable – Disable QoS globally.

•

Trust Mode – Select which packet fields to use for classifying packets entering the 
device. The possible Trust Mode field values are: 

–

CoS – Classify traffic based on the CoS (VPT) tag value.

–

DSCP – Classify traffic based on the DSCP tag value.

2. Select the QoS Mode and Trust Mode in the provided fields.

3. Click APPLY to update the device.

The CoS Interface Configuration screen contains information for configuring the default CoS 
value on a selected interface. After CoS has been configured, the device original CoS default 
settings can be reassigned to the interface in the CoS Interface Configuration screen.