Netgear GS748TP – ProSAFE GS748TP 48-Port Gigabit Smart Switch and PoE Manual Do Utilizador

Monitoring the Switch

7-7

–

Alert – The second highest warning level. An alert log is saved, if there is a serious 
device malfunction; for example, all device features are down.

–

Critical – The third highest warning level. A critical log is saved if a critical device 
malfunction occurs; for example, two device ports are not functioning, while the rest 
of the device ports remain functional.

–

Error – A device error has occurred; for example, if a single port is offline.

–

Warning – The lowest level of a device warning. The device is functioning, but an 
operational problem has occurred.

–

Notice – Provides device information.

–

Informational – Provides device information.

–

Debug – Provides debugging messages.

•

Description – Displays the log message text.

2. Click REFRESH or CLEAR LOGS to refresh or reset the Flash Logs screen.

The Server Log screen contains information for viewing and configuring the remote log servers. 
New log servers can be defined and the log severity sent to each server.

To configure remote log servers:

1. Click Monitoring > Logs > Server Log. The Server Log screen displays:

The Server Log screen contains the following fields: 

•

Server IP – Enter the server’s IP address to which logs can be sent.

•

UDP Port – Enter the UDP port to which the server logs are sent. The possible range is 1 
- 65535. The default value is 514.