Netgear GS752TPS(B) - ProSAFE 48-Port Gigabit Stackable Smart Switch with PoE and 4 SFP uplinks Manual Do Equipamento
30
|
Chapter 4. Installation
GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switch Hardware Installation Guide
Step 8: Managing the Switch using a Web Browser or the
PC Utility
PC Utility
The GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switch contains software for
viewing, changing, and monitoring the way it works. This management software is not
required for the switch to work. The ports can be used without using the management
software. However, the management software enables the setup of VLAN and trunking
features and also improves the efficiency of the switch, which results in the improvement of
its overall performance as well as the performance of the network.
viewing, changing, and monitoring the way it works. This management software is not
required for the switch to work. The ports can be used without using the management
software. However, the management software enables the setup of VLAN and trunking
features and also improves the efficiency of the switch, which results in the improvement of
its overall performance as well as the performance of the network.
After powering up the switch for the first time, the Smart Switch can be configured using a
Web browser or a program called Smart Control Center. For more information about
managing the switch, see the Software Administration Manual on the Smart Switch Resource
CD.
Web browser or a program called Smart Control Center. For more information about
managing the switch, see the Software Administration Manual on the Smart Switch Resource
CD.
Note:
The switch is configured with a default IP address of 192.168.0.239
and a subnet mask of 255.255.255.0.