Netgear GS752TPS(B) - ProSAFE 48-Port Gigabit Stackable Smart Switch with PoE and 4 SFP uplinks Guia Do Programa
119
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
Voice VLAN Port Setting
To display the Voice VLAN Port Setting page, click Switching
> Voice VLAN > Advanced >
Port Setting.
To configure Voice VLAN port settings:
1.
Select the check box next to the port to configure. You can select multiple check boxes
to apply the same setting to all selected ports.
to apply the same setting to all selected ports.
2.
From the Voice VLAN Mode menu, specify whether to enable or disable Voice VLAN on the
selected port.
selected port.
3.
From the Voice VLAN ID menu, set the Voice VLAN ID to be used for voice traffic. The
default value is 2.
default value is 2.
4.
From the Remark CoS menu, specify whether to enable or disable class of service remarks
on the selected port.
on the selected port.
5.
From the Class of Service column, the CoS tag value to be reassigned for packets
received on the voice VLAN when Remark CoS is displayed when this feature is enabled.
received on the voice VLAN when Remark CoS is displayed when this feature is enabled.
6.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
the latest value of the switch.
7.
If you make any changes to this page, click Apply to send the updated configuration to the
switch.
switch.
Note:
The Membership field displays whether a registered voice device
(OUI or LLDP-MED) is currently active or not active on the interface.