Netgear GS752TPS(B) - ProSAFE 48-Port Gigabit Stackable Smart Switch with PoE and 4 SFP uplinks Guia Do Programa

VLAN Routing Configuration

Use the VLAN Routing Configuration page to view information about the VLAN routing 
interfaces configured on the system or to assign an IP address and subnet mask to VLANs 
on the system.

To display the page, click Routing 



 VLAN, and then click the VLAN Routing link.

To configure VLANs for routing:

Select the VLAN you want to configure for VLAN Routing. The VLAN field displays the 
IDs of all VLANs configured on this switch. To change the settings for a VLAN routing 
interface that has already been configured, select the appropriate check box.

Enter an IP address for the VLAN Routing Interface.

Enter a subnet mask for the VLAN Routing Interface.

Specify the maximum size of IP packets sent on an interface. A valid range is from 68 bytes 
to the link MTU. The default value is 1500. A value of 0 indicates that the IP MTU is 
unconfigured. When the IP MTU is unconfigured, the router uses the link MTU as the IP 
MTU. The link MTU is the maximum frame size minus the length of the layer 2 header.

View additional information about configured VLAN routing interfaces:

Port. The logical interface number assigned to the VLAN routing interface. 

MAC Address. The MAC Address assigned to the VLAN routing interface. 

Click Add to add the VLAN routing interface.

Click Delete to remove the selected VLAN routing interface.

Click Cancel to cancel the configuration on the screen and reset the data on the screen to 
the latest value of the switch.

If you change any of the settings on the page, click Apply to send the updated configuration 
to the switch. Configuration changes take effect immediately.