Netgear GS752TPS(B) - ProSAFE 48-Port Gigabit Stackable Smart Switch with PoE and 4 SFP uplinks Guia Do Programa

To restore the configuration to a previously saved version:

Click the Maintenance tab and select the device with the configuration to restore.

Click Download Configuration.

From the Select a Configuration window that appears, navigate to and select the 
configuration file to download to the switch.

Click Open.

Enter the switch password and click Apply to begin the download process.

Optionally, you can schedule a different date and time to download the configuration file. 
To delay the download process, clear the Run Now? check box and enter a date and 
time to complete the download.

Click the Tasks tab to view status information about the 

configuration download.

Firmware Upgrade

The application software for the GS728TS, GS728TPS, GS752TS, and GS752TPS Smart 
Switches is upgradeable, enabling your switch to take advantage of improvements and 
additional features as they become available. The upgrade procedure and the required 
equipment are described in this section. This procedure assumes that you have downloaded 
or otherwise obtained the firmware upgrade and that you have it available as a binary file on 
your computer. This procedure uses the TFTP protocol to implement the transfer from 
computer to switch.

You can also upgrade the firmware using the TFTP Download and 

HTTP Download features mentioned in this book. See 

To upgrade your firmware:

Click the Maintenance tab, and then click the Firmware link directly below the tabs (see 

Select the switch to upgrade and click Download Firmware. 

From the Select new firmware window that appears, navigate to and select the firmware 
image to download to the switch.

Click Open.