Netgear GS752TPS(B) - ProSAFE 48-Port Gigabit Stackable Smart Switch with PoE and 4 SFP uplinks Guia Do Programa

Página de 329
211
 GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
HTTP Configuration
Use the HTTP Configuration page to configure the HTTP server settings on the system.
To access the HTTP Configuration page, click Security > Access, and then click the HTTP > 
HTTP Configuration
 link.
To configure the HTTP server settings:
1. 
Enable or disable the Web Java Mode. This applies to both secure and un-secure HTTP 
connections. The currently configured value is shown when the Web page is displayed. 
The default value is Enable.
2. 
In the HTTP Session Soft Timeout field, specify the number of minutes an HTTP session 
can be idle before a timeout occurs. 
After the session is inactive for the configured amount of time, the administrator is 
automatically logged out and must re-enter the password to access the management 
interface. A value of zero corresponds to an infinite timeout. The default value is 5 
minutes. The currently configured value is shown when the Web page is displayed.
3. 
In the HTTP Session Hard Timeout field, specify the hard timeout for HTTP sessions. 
This timeout is unaffected by the activity level of the session. The value must be in the 
range of (0–168) hours. A value of zero corresponds to an infinite timeout. The default 
value is 24 hours. The currently configured value is shown when the Web page is 
displayed.
4. 
In the Maximum Number of HTTP Sessions field, specify the maximum number of HTTP 
sessions that can exist at the same time. The value must be in the range of (0–16). The 
default value is 16. The currently configured value is shown when the Web page is 
displayed.
5. 
Click Cancel to cancel the configuration on the screen and reset the data on the screen to 
the latest value of the switch.
6. 
If you make changes to the page, click Apply to apply the changes to the system.