Netgear FSM7352S – ProSAFE 48 Port 10/100 L3 Managed Stackable Switch with 4 Gigabit Ports Manual De Referência

Management Commands

10-40

method1 [method2…]  At least one from the following table:

This command is used to remove the authentication at login.

Use this command to save running configuration changes to NVRAM so that the changes you 
make will persist across a reboot. This command is the same as copy system:running 
config nvram:startup-config

.

This section describes the commands you use to configure Simple Network Management Protocol 
(SNMP) on the switch. You can configure the switch to act as an SNMP agent so that it can 
communicate with SNMP managers on your network. 

Uses the local username database for authentication.

Uses no authentication.

Uses the list of all RADIUS servers for authentication. 

no aaa authentication dot1x default 

Global Config

write memory

Privileged EXEC