Netgear S3300-28X (GS728TX) - ProSAFE S3300 Smart Switch Series Guia Do Administrador

Página de 346
Configuring Switching 
173
 S3300 Smart Switch
MSRP Reservation Parameters
Use the MSRP Reservation Parameters screen to view information about the talker, listener, 
and intermediate device status for the devices involved in each MSRP stream flowing 
through the switch.
To view the MSRP Reservation Parameters screen, select Switching > MRP 
 Advanced 
 
MSRP Reservation Parameters
The following table describes status fields on the MSRP Reservation Parameters screen.
Table 66.  MSRP Reservation Parameters
 
Field
Description 
Interface 
The interface associated with the rest of the information in the row.
Stream ID 
A 16-bit unsigned integer value, Unique ID, used to distinguish among 
multiple streams sourced by the same system.
Listener Declaration Status 
The MSRP declaration status of the listener attribute.
Listener Declaration Type 
The MSRP declaration type of the listener attribute.
Talker Declaration Status 
The MSRP declaration status of the talker attribute.
Talker Declaration Type 
The MSRP declaration type of the talker attribute.
Accumulated Latency 
Identifies how much latency, in nanoseconds, the stream has suffered 
in its path from the Talker to a given Listener. It starts as a 0 in a Talker 
Advertise Declaration at the Talker, and its value is increased by one 
for each bridge as the Talker Advertise Declaration propagates through 
the network.
Failure Bridge Interface 
The interface on the Bridge where the failure occurred.
Failure Code 
The number that represents the reason for the failure. The switch 
supports the following codes:
• 
1—Insufficient bandwidth
• 
3—Insufficient bandwidth for the traffic class
• 
5—Stream destination_address is already in use
• 
7—Reported latency has changed
• 
8—Egress port is not Audio/Video Bridging (AVB) capable
• 
9—Use a different destination_address (i.e. MAC DA hash table 
full)
• 
12—Cannot store destination_address (i.e., Bridge is out of MAC 
DA resources)
• 
13—Requested priority is not an SR Class priority
• 
14—MaxFrameSize is too large for media
• 
15—msrpMaxFanInPorts limit has been reached
• 
16—Changes in FirstValue for a registered StreamID
• 
17—VLAN is blocked on this egress port (Registration Forbidden)