Netgear S3300-28X (GS728TX) - ProSAFE S3300 Smart Switch Series Guia Do Administrador
Configuring Quality of Service
206
S3300 Smart Switch
Class Configuration
Use the Class Configuration screen to add a new DiffServ class name, or to rename or delete
an existing class. The screen also allows you to define the criteria to associate with a DiffServ
class. As packets are received, these DiffServ classes are used to prioritize packets. You can
have multiple match criteria in a class. The logic is a Boolean logical-and for this criteria. After
creating a Class, click the class link to the Class screen.
an existing class. The screen also allows you to define the criteria to associate with a DiffServ
class. As packets are received, these DiffServ classes are used to prioritize packets. You can
have multiple match criteria in a class. The logic is a Boolean logical-and for this criteria. After
creating a Class, click the class link to the Class screen.
To create a DiffServ class:
1.
Select QoS
DiffServ
Advanced
Class Configuration.
2.
In the Class Name field, enter a class name.
3.
Select the class type
4.
Click the Add button.
The switch supports only the Class Type value All, which means all the various match
criteria defined for the class should be satisfied for a packet match. All signifies the logical
criteria defined for the class should be satisfied for a packet match. All signifies the logical
AND of all the match criteria.
5.
Click the Cancel button to cancel the configuration on the screen, and reset the data on the
screen to the latest value of the switch.
screen to the latest value of the switch.
To rename an existing class:
1.
Select the check box next to the configured class.
2.
In the Class Name field, update the name.
3.
Click the Apply button.
To delete a class:
1.
Select the check box next to the class name.
2.
Click the Delete button.
To configure the class match criteria:
1.
Click the class name for an existing class.
Figure 52. DiffServ Class Name