Netgear XS728T – ProSAFE® 10 Gigabit Smart Managed Switch Manual Do Equipamento
Troubleshooting
24
XS728T Smart Managed Switch
that cable distances, repeater limits, and other physical aspects of the installation do not
exceed the Ethernet limitations.
exceed the Ethernet limitations.
Switch Integrity
If necessary, verify the integrity of the switch by resetting the switch. To reset the switch,
remove the AC power from the switch and then reapply AC power. If the problem continues,
contact NETGEAR technical support. In North America, call 1-888-NETGEAR. If you are
outside North America, refer to the support information card included with your product.
remove the AC power from the switch and then reapply AC power. If the problem continues,
contact NETGEAR technical support. In North America, call 1-888-NETGEAR. If you are
outside North America, refer to the support information card included with your product.
Autonegotiation
The RJ-45 ports negotiate the correct duplex mode, speed, and flow control if the device at
the other end of the link supports autonegotiation. If the device does not support
autonegotiation, the switch determines only the speed correctly, and the duplex mode
defaults to half-duplex.
the other end of the link supports autonegotiation. If the device does not support
autonegotiation, the switch determines only the speed correctly, and the duplex mode
defaults to half-duplex.