Netgear S3300-28X-PoE+ (GS728TXP) - ProSAFE S3300 Smart Switch Series Manual Do Equipamento

The following table describes the system LED designations.

Power LED

. 

  Power is not supplied to the smart switch.

Solid green . 

  The smart switch is powered on and operating normally.

Solid yellow . 

  The smart switch is booting.

Fan LED

. 

  The fan is operating normally.

. 

  The fan failed.

Stack ID LED

The Stack ID LED consists of two components, the Segment LED and the Dot LED. 
The Segment LED contains seven segments to display the stack unit number of the 
smart switch. The Dot LED is located at the bottom right of the Stack ID LED and 
provides information about whether the smart switch is the master in the stack.

Segment LED solid green and Dot LED solid green. This LED status 
indicates  one of the following situations:

The smart switch is a standalone switch and is not a member of a stack. The 
Segment LED displays the unit number.

The smart switch is a member of a stack and is the master of the stack. The 
Segment LED displays the stack unit number.

Segment LED solid green and Dot LED off. The smart switch is a member of 
a stack but is not the master of the stack. The Segment LED displays the stack 
unit number.

PoE Max LED

. More than 7 watts (W) of PoE power is available for another powered 

device (PD).

Solid yellow . 

  Less than 7 watts (W) of PoE power is available for another PD.

Blinking yellow . 

  The attached PD was active in the past two minutes.

This section describes the smart switch hardware features for models S3300-28X and 
S3300-28X-PoE+.

The S3300-28X and S3300-28X-PoE+ models provide twenty four 10/100/1000 Mbps ports, 
two dedicated 100M/1G/10GBASE-T, and two dedicated 10G/1G SFP+ ports.

Each port can sense the line speed and negotiate the duplex mode with the link partner 
automatically. Model S3300-28X-PoE+ supports PoE+ on ports 1 through 24.