Netgear S3300-28X-PoE+ (GS728TXP) - ProSAFE S3300 Smart Switch Series Guia Do Administrador
Configure System Information
45
S3300 Smart Switch
Click Update to update the page with the latest information on the switch.
IP Configuration
Use the IP Configuration screen to configure network information for the management
interface, which is the logical interface used for in-band connectivity with the switch through
any of the switch’s front-panel ports. The configuration parameters associated with the
switch’s network interface do not affect the configuration of the front panel ports through
which traffic is switched or routed.
interface, which is the logical interface used for in-band connectivity with the switch through
any of the switch’s front-panel ports. The configuration parameters associated with the
switch’s network interface do not affect the configuration of the front panel ports through
which traffic is switched or routed.
To configure the network information for the management interface:
1.
Select System
Management
IP Configuration.
2.
Select the appropriate radio button to determine how to configure the network information for
the switch management interface:
the switch management interface:
•
Dynamic IP Address (DHCP). Specifies that the switch must obtain the IP address
through a DHCP server.
through a DHCP server.
•
Dynamic IP Address (BOOTP). Specifies that the switch must obtain the IP address
through a BootP server.
through a BootP server.
•
Static IP Address. Specifies that the IP address, subnet mask, and default gateway
must be manually configured. Enter this information in the fields below this radio
button.
must be manually configured. Enter this information in the fields below this radio
button.
3.
If you selected the Static IP Address option, configure the following network information:
•
IP Address. The IP address of the network interface. The factory default value is
192.168.0.239. Each part of the IP address must start with a number other than zero.
For example, IP addresses 001.100.192.6 and 192.001.10.3 are not valid.
192.168.0.239. Each part of the IP address must start with a number other than zero.
For example, IP addresses 001.100.192.6 and 192.001.10.3 are not valid.
•
Subnet Mask. The IP subnet mask for the interface. The factory default value is
255.255.255.0.
255.255.255.0.
•
Default Gateway. The default gateway for the IP interface. The factory default value
is 192.168.0.254.
is 192.168.0.254.
4.
Specify the VLAN ID for the management VLAN.
Card Type
Displays the hardware type of this supported card. This is a 32-bit data field.
Card Descriptor
Displays a data field used to identify the supported card.
Supported Switch
Switch Model ID
Displays the list of models of all supported switches.
Switch Index
Displays the index assigned to the selected switch.
Management Preference
Displays management preference of the supported switch.
Table 12. Slot Information (continued)
Field
Description