Netgear XS728T – ProSAFE® 10 Gigabit Smart Managed Switch Guia Do Administrador
Hardware Specifications and Default Values
182
XS728T ProSAFE 28-Port 10-Gigabit L2+ Smart Switch
Switch Features and Defaults
Feature
Sets Supported
Default
Auto negotiation/static
speed/duplex
All ports
Auto-negotiation
Auto MDI/MDIX
N/A
Enabled
802.3x flow control/back pressure 1 (per system)
Disabled
Port mirroring
1 destination port and 8 source
ports
ports
Disabled
Port trunking (aggregation)
8
Pre-configured
802.1D spanning tree
1
Disabled
802.1w RSTP
1
Enabled
802.1s spanning tree
16 instances
Disabled
Static 802.1Q tagging
512
Default VLAN ID = 1
Learning process
Supports static and dynamic MAC
entries
entries
Dynamic learning is enabled by
default
default
Storm control per each packet
type (unicast, broadcast,
multicast)
type (unicast, broadcast,
multicast)
All ports
Disabled
Jumbo frame
All ports
Enabled.
Max.= 10 KB
Max.= 10 KB
Number of queues
8
N/A
Port based
N/A
N/A
802.1p
1
Enabled
DSCP
1
Disabled
Rate limiting
All ports
Disabled
Auto-QoS
All ports
Disabled
802.1x
All ports
Disabled
MAC ACL
164 (shared with IP and IPv6
ACLs)
All MAC addresses allowed
IP ACL
164 (shared with MAC and IPv6
ACLs)
All IP addresses allowed
IPv6 ACL
164 (shared with IP ACL and MAC
ACL)
All IP addresses allowed