Netgear XS728T – ProSAFE® 10 Gigabit Smart Managed Switch Guia Do Administrador

The factory default is Enable.

Click Apply. 

Configuration changes take effect immediately.

The screen allows you to view a list of the supported MIBs. 



Select System > SNMP > SNMP v1/v2 > Supported MIBS.

This is the configuration for SNMP v3.

The SNMPv3 Access Mode is a read-only field that shows the access privileges for the user 
account. The admin account always has read/write access, and all other accounts have 
read-only access.



Select System > SNMP > SNMP v3 > User Configuration. 

Next to Authentication Protocol, select the SNMPv3 Authentication Protocol setting for the 

selected user account. The following are the valid authentication protocols:

None. No authentication is performed 

MD5 or SHA. The user login password is used as SNMPv3 authentication password, 
and you must therefore specify a password. The password must be eight characters 
in length.

Next to Encryption Protocol, select whether to encrypt SNMPv3 packets transmitted by the 

switch.

None. Do not encrypt the contents of SNMPv3 packets transmitted from the switch.

DES. Encrypt SNMPv3 packets using the DES encryption protocol.

If you selected DES for the Encryption Protocol, enter the SNMPv3 encryption key in the 

Encryption Key field. Otherwise, this field is ignored. Valid keys are 0–15 characters long. 

Click Apply. 

Configuration changes take effect immediately.

The IEEE 802.1AB-defined standard, Link Layer Discovery Protocol (LLDP), allows stations 
on an 802 LAN to advertise major capabilities and physical descriptions. A network manager 
views this information to identify system topology and detect bad configurations on the LAN.