Netgear XS728T – ProSAFE® 10 Gigabit Smart Managed Switch Guia Do Administrador
Switching
57
XS728T ProSAFE 28-Port 10-Gigabit L2+ Smart Switch
1.
Select Switching
> Voice VLAN > Basic > Properties.
2.
Next to Voice VLAN Status, enable or disable (default) voice VLAN on the switch.
If the switch does not handle traffic from IP phones, the status should be disabled.
3.
From the Voice VLAN ID list, select the VLAN ID to use for voice traffic.
4.
In the Class of Service list, select the CoS tag value to be reassigned for packets received
on the voice VLAN when Remark CoS is enabled. The default value is 6.
5.
In the Remark CoS list, specify whether to enable or disable (default) Class of Service
remarks on the selected port.
6.
In the Voice VLAN Aging Time field, specify the amount of time after the last IP
phone’s OUI is aged out for a specific port.
The port ages out after the bridge and voice aging time.
7.
Click Apply to send the updated configuration to the switch.
Configuration changes take effect immediately.
Port Setting
To configure Voice VLAN port settings:
1.
Select Switching
> Voice VLAN > Advanced > Port Setting.
2.
Select the check box next to the port to configure.
You can select multiple check boxes to apply the same setting to all selected ports.
Or
3.
In Go To Interface.
Enter the port to be configured and click Go.
4.
From the Voice VLAN Mode list, specify whether to enable or disable voice VLAN on the
selected port.
5.
Click Apply to send the updated configuration to the switch.
Note:
The Membership field displays whether the current operational status
of the voice VLAN on the interface is active or not active.
of the voice VLAN on the interface is active or not active.
OUI
The Organizational Unique Identifier (OUI) identifies the IP phone manufacturer. The switch
comes preconfigured with the following OUIs:
comes preconfigured with the following OUIs:
•
00:01:E3. SIEMENS
•
00:03:6B. CISCO1