Netgear GS748Tv5 - ProSAFE 48-port Gigabit Smart Switch Guia Do Administrador
Getting Started
15
GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches
Discover a Switch in a Network without a DHCP Server
This section describes how to use the Smart Control Center to set up your switch in a
network without a DHCP server. If your network has no DHCP service, you must assign a
static IP address to your switch. If you choose, you can assign it a static IP address, even if
your network has DHCP service.
network without a DHCP server. If your network has no DHCP service, you must assign a
static IP address to your switch. If you choose, you can assign it a static IP address, even if
your network has DHCP service.
To assign a static IP address:
1.
Connect the switch to your existing network.
2.
Power on the switch by connecting its power cord.
3.
Install the Smart Control Center on your computer.
4.
Start the Smart Control Center.
5.
Click the Discover button for the Smart Control Center to find your GS716Tv3, GS724Tv4,
or GS748Tv5 switch.
or GS748Tv5 switch.
The utility broadcasts Layer 2 discovery packets within the broadcast domain to discover
the switch.
the switch.
6.
Select the switch, then click the Configure Device button.
The screen expands to display additional fields at the bottom.
7.
Select the Disabled radio button to disable DHCP.
8.
Enter the static switch IP address, gateway IP address, and subnet mask for the switch.