Netgear GS748Tv5 - ProSAFE 48-port Gigabit Smart Switch Guia Do Administrador
Configuring Quality of Service
168
GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches
Diffserv Configuration
Use the DiffServ Configuration screen to display DiffServ general status group information,
which includes the current administrative mode setting as well as the current and maximum
number of rows in each of the main DiffServ private MIB tables.
which includes the current administrative mode setting as well as the current and maximum
number of rows in each of the main DiffServ private MIB tables.
To configure the global DiffServ mode:
1.
Select QoS
>
DiffServ
>
Advanced
>
DiffServ Configuration.
2.
Next to DiffServ Admin Mode, select Enable.
If you disable DiffServ after it has been configured and enabled, the DiffServ configuration
is retained and can be changed, but it is not active.
is retained and can be changed, but it is not active.
3.
Click the Apply button.
The following table describes the information displayed in the Status table on the DiffServ
Configuration screen:
Configuration screen:
Table 56. DiffServ MIB table information
Field
Description
Class Table
The current and maximum number of rows of the class table.
Class Rule Table
The current and maximum number of rows of the class rule table.
Policy Table
The current and maximum number of rows of the policy table.
Policy Instance Table
The current and maximum number of rows of the policy instance table.
Policy Attributes
Table
Table
The current and maximum number of rows of the policy attributes table.
Service Table
The current and maximum number of rows of the service table.