Netgear GS748Tv5 - ProSAFE 48-port Gigabit Smart Switch Guia Do Administrador

Access control allows you to configure a profile and set access rules.

Use the Access Profile Configuration screen to set up a security access profile.



Select Security > Access > Access Control 

>

 Access Profile Configuration.

In the Access Profile Name field, specify the name of the access profile to be added.

Select one of the following options:

Activate Profile. Activate an access profile.

Deactivate Profile. Deactivate an access profile.

Remove Profile. Remove an access profile. The access profile should be 
deactivated before removing the access profile.

Click the Apply button.

The following table describes the access profile status information and the profile summary 
information the screen displays.

Packets Filtered

The number of packets filtered. 

Rule Type

The action to be performed when the rules selected are matched. 

Service Type

The policy is restricted by the management chosen from the list. Possible 
methods include HTTP, Secure HTTP (SSL), and SNMP.

Source IP Address

The Source IP Address of the client originating the management traffic. 

Mask

The Source IP Address Mask of the client originating the management traffic. 

Priority

The rule priority value. The rules are validated against the incoming management 
request in the ascending order of their priorities. If a rule matches, action is 
performed and subsequent rules below are ignored. For example, if a Source IP 
10.10.10.10 is configured with priority 1 to permit, and Source IP 10.10.10.10 is 
configured with priority 2 to Deny, then access is permitted if the profile is active, 
and the second rule is ignored.