Netgear GS748Tv5 - ProSAFE 48-port Gigabit Smart Switch Guia Do Administrador

Use the Trap Logs screen to view information about the SNMP traps generated on the switch. 

To view trap log information, select Monitoring 

>

 Logs > Trap Logs. The Trap Logs screen 

displays.

The following table describes the Trap Log information displayed on the screen. 

The screen also displays information about the traps that were sent.

Number of Traps Since 
Last Reset

The number of traps that have occurred since the switch last reboot.

Trap Log Capacity

The maximum number of traps stored in the log. If the number of traps exceeds the 
capacity, the entries will overwrite the oldest entries.

Number of Traps Since 
Log Last Viewed

The number of traps that have occurred since the traps were last displayed. 
Displaying the traps by any method (such as terminal interface display, web 
display, or upload file from switch) will cause this counter to be cleared to 0.

Log

The sequence number of this trap.

System Up Time

The time at which this trap occurred, expressed in days, hours, minutes, and 
seconds since the last reboot of the switch.

Trap

Information identifying the trap.