Netgear GS748Tv5 - ProSAFE 48-port Gigabit Smart Switch Guia Do Administrador
Configuring Switching
86
GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches
LACP Configuration
The LACP configuration screen is used to set the LACP system priority.
To configure LACP:
1.
Select Switching
>
LAG
>
Advanced
>
LACP Configuration.
2.
In the LACP System Priority field, specify the device’s link aggregation priority relative to the
devices at the other ends of the links on which link aggregation is enabled.
devices at the other ends of the links on which link aggregation is enabled.
A higher value indicates a lower priority. You can change the value of the parameter
globally by specifying a priority from 1–65535. The default value is 32768.
globally by specifying a priority from 1–65535. The default value is 32768.
3.
Click the Apply button.
LACP Port Configuration
The LACP port configuration screen is used to configure the LACP priority value for the
selected port and the administrative LACP time-out value.
selected port and the administrative LACP time-out value.
To configure LACP port priority settings:
1.
Select Switching
>
LAG
>
Advanced
>
LACP Port Configuration.
2.
Select the ports to configure:
For information about how to select and configure one or more ports and LAGs, see
3.
Configure the LACP Priority value for the selected port(s).
This value specifies the device’s link aggregation priority relative to the devices at the
other ends of the links on which link aggregation is enabled. A higher value indicates a
lower priority.
other ends of the links on which link aggregation is enabled. A higher value indicates a
lower priority.
4.
Configure the administrative LACP time-out value.
•
Long. Specifies a long time-out value.
•
Short. Specifies a short time-out value.
5.
Click the Apply button.