Netgear GS748Tv5 - ProSAFE 48-port Gigabit Smart Switch Guia Do Administrador
Configuring Switching
89
GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches
VLAN Membership Configuration
Use this screen to configure VLAN port membership for a particular VLAN. You can select the
Group operation through this screen.
Group operation through this screen.
To configure VLAN membership for individual ports and LAGs:
1.
Select Switching
>
VLAN
>
Advanced
>
VLAN Membership.
2.
From the VLAN ID list, select the VLAN to which you want to add ports.
3.
Click the orange bar below the VLAN Type field to display the physical ports on the switch.
4.
Click the lower orange bar to display the LAGs on the switch.
5.
To select the ports or LAGs to add to the VLAN, click the square below each port or LAG.
You can add each interface as a tagged (T) or untagged (U) VLAN member. A blank
square means that the port is not a member of the VLAN.
square means that the port is not a member of the VLAN.
•
Tagged. Frames transmitted from this port are tagged with the port VLAN ID.
•
Untagged. Frames transmitted from this port are untagged. Each port can be an
untagged member of only one VLAN. By default, all ports are an untagged member of
VLAN 1.
untagged member of only one VLAN. By default, all ports are an untagged member of
VLAN 1.
In the following figure, ports 6, 7, and 8 and LAG 1 are being added as tagged members
to VLAN 100.
to VLAN 100.
6.
Click the Apply button.