Netgear GS728TPP – 28PT GE POE+ SMART SWITCH Manual Do Equipamento

To install an SFP transceiver, insert the transceiver into the SFP port. Press firmly on the 
flange of the module to seat it securely into the connector. You can install up to three more 
Gigabit Ethernet modules using this procedure.

Step 6: Apply AC Power

The GS752TP, GS728TP, and GS728TPP Gigabit Smart Switch does not have an On/Off 
switch. Power is controlled by the power cord connection. 

Before connecting the power cord, select an AC outlet that is not controlled by a wall switch, 
which can turn off power to the switch. After selecting an appropriate outlet, use the following 
procedure to apply AC power:

Connect the end of the power connection cable to the power receptacle on the back of 
the switch.

Connect the AC power connection cable into a power source such as a wall socket or 
power strip.

When you apply power, the Power LED on the switch’s front panel lights.

If the Power LED does not light, check that the power cable is plugged in correctly and that 
the power source is good. If this does not resolve the problem, refer to 

.

Step 7: Apply RPS DC Power

This step is applicable to the GS728TPP only. Plug in the external RPS power supply to the 
RPS connector on the back panel.