Netgear GS752TP - 52PT GE POE SMART SWITCH Guia Do Administrador

Use the Queue Configuration screen to define what a particular queue does by configuring 
switch egress queues. User-configurable parameters control the amount of bandwidth used 
by the queue and the scheduling of packet transmission from the set of all queues on a port. 
The CoS queue configuration is global.

You can configure four queues as strict priority or weighted round robin (WRR) priority. If a 
specific queue is configured as WRR, all the queues with a lower number are also WRR 
queues. The configuration is global and not per port.



Select QoS 



 CoS 



 Advanced 



 Queue Configuration.

The following screen displays:

 

Select the check box next to the port or LAG to configure. 

You can select multiple ports and LAGs to apply the same setting to the selected 
interfaces. Select the check box in the heading row to apply a trust mode or rate to all 
interfaces.

Configure any of the following settings:

Queue ID. Select the queue to be configured.

Minimum Bandwidth. Enter a value in the range 1–100 that reflects the relative 
bandwidth of this queue. The bandwidth allocation per queue is the configured weight 
divided by the sum of all the configured weights. The sum of the minimum bandwidths 
for all queues does not have to equal 100.

Scheduler Type. Select the type of queue processing. Options are Weighted and 
Strict. Defining on a per-queue basis enables you to create the desired service 
characteristics for different types of traffic. Four queues can be configured as strict