Netgear GS752TP - 52PT GE POE SMART SWITCH Guia Do Administrador
Managing Device Security
171
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
3.
Click APPLY to update the switch with the HTTPS Authentication settings.
Secure HTTP Configuration
Secure HTTP enables the transmission of HTTP over an encrypted Secure Sockets Layer
(SSL) or Transport Layer Security (TLS) connection. When you manage the switch by using
a web interface, secure HTTP can help ensure that communication between the
management system and the switch is protected from eavesdroppers and man-in-the-middle
attacks.
(SSL) or Transport Layer Security (TLS) connection. When you manage the switch by using
a web interface, secure HTTP can help ensure that communication between the
management system and the switch is protected from eavesdroppers and man-in-the-middle
attacks.
Use the Secure HTTP Configuration screen to configure the settings for HTTPS
communication between the management station and the switch.
communication between the management station and the switch.
To configure HTTPS settings:
1.
Select Security
Access > HTTPS
HTTPS Configuration.
The following screen displays:
2.
Use the radio buttons next to the HTTPS Admin Mode to enable or disable the
administrative mode of Secure HTTP.
The default value is Disable. You can download SSL certificates only when the HTTPS
Admin mode is disabled.
3.
In the HTTPS Port field, specify the TCP port to use for HTTPS data.
The value must be in the range of 1–65535. Port 443 is the default value. The currently
configured value is shown when the web screen is displayed.
configured value is shown when the web screen is displayed.
4.
In the HTTPS Session Soft Timeout (Minutes) field, specify the number of minutes an
HTTPS session can be idle before a timeout occurs.