Netgear GS752TP - 52PT GE POE SMART SWITCH Guia Do Administrador

EtherType Key. Requires a packet’s EtherType to match the EtherType you select. 
Select the EtherType value from the drop-down list. If you select User Value, you can 
enter a custom EtherType value.

EtherType User Value. This field is configurable if you select User Value from the 
EtherType drop-down list. The value you enter specifies a customized EtherType to 
compare against an Ethernet frame. The valid range is 0x0600–0xFFFF.

Source MAC. Requires a packet’s source port MAC address to match the address 
listed here. Enter a MAC address in this field. The valid format is xx:xx:xx:xx:xx:xx.

Source MAC Mask. If desired, enter the MAC mask for the source MAC address to 
match. Use Fs and 0s in the MAC mask, which is in a wildcard format. An F means 
that the bit is not checked, and a 0 in a bit position means that the data must equal the 
value given for that bit. The valid format is xx:xx:xx:xx:xx:xx. A MAC mask of 
00:00:00:00:00:00 matches a single MAC address.

VLAN. Requires a packet’s VLAN ID to match the ID listed here. Enter the VLAN ID to 
apply this criteria. The valid range is 1–4093.

Logging. Enables or disables logging of management access list (ACL) deny events.

Click ADD.

To change a rule, select the check box associated with the rule, change the desired fields, 
and click APPLY. 

When an ACL is bound to an interface, all the rules that have been defined are applied to the 
selected interface. Use the MAC Binding Configuration screen to assign MAC ACL lists to 

ACL priorities and interfaces. 



Select Security 



 ACL > Basic 



 MAC Binding Configuration.