Netgear GS752TP - 52PT GE POE SMART SWITCH Guia Do Administrador

Make sure that the PVID of at least one port that is a port of the VLAN 
is the same as the management VLAN ID. For information about 
creating VLANs and configuring the PVID for a port, see 

The management VLAN has the following requirements:

Only one management VLAN can be active at a time.

When a new management VLAN is configured, connectivity through the existing 
management VLAN is lost.

The management station must be reconnected to the port in the new management 
VLAN.

Click APPLY to apply the changes to the system.

Use the IPv6 Network Configuration screen to configure the IPv6 network interface, which is 
the logical interface used for in-band connectivity with the switch through all of the switch's 
front-panel ports. The configuration parameters associated with the switch's network 
interface do not affect the configuration of the front-panel ports through which traffic is 
switched or routed.

To access the switch over a IPv6 network, you must initially configure the switch with IPv6 
information (IPv6 prefix, prefix length, and default gateway). IPv6 can be configured using 
IPv6 autoconfiguration.

When in-band connectivity is established, IPv6 information can be changed using any of the 
following:

SNMP-based management

Web-based management



Select System 





 IPv6 Network Configuration.