Netgear GS752TP - 52PT GE POE SMART SWITCH Guia Do Administrador

Use the PoE Port Configuration screen to configure PoE settings on the ports. The following 
information is displayed for each port:

Indicates whether the port can deliver power (Enable) or cannot deliver 
power (Disable).

The switch might not be able to supply power to all connected devices. 
Priority is used to determine which ports can supply power if power is 
limited. When ports have the same priority, the lower numbered port is given 
a higher priority.

802.3at.

Class of the powered device (PD) connected to the port. The classes define 
the range of maximum power output that the switch generates. The power 
level that the PD can actually use is slightly lower. The classes are defined 
as follows: 
0. 0–15.4W
1. 0–4W
2. 0–7W
3. 0–15.4W
4. 0–30W.

Indicates the timer schedule to use for the port. By default, no timer 
schedules are configured. 

Output Voltage (Volt) 

Displays the current voltage being delivered to device.

Displays the current being delivered to device.

Output Power (Watt) 

Displays the current power being delivered to the device.

Power Limit 

Displays the maximum amount of power limit that the port can generate. The 
maximum amount is 15400 mW.

Status 

Status of power being delivered by the port:

Disabled. No power is being delivered.

DeliveringPower. Power is being drawn by a connected device.

Fault. There is a problem with the port.

Test. The port is in test mode.

OtherFault. The port is idle due to an error condition.

Searching. Port default state when PD not connected.



Select System 







 PoE Port Configuration.