Netgear GS728TPP – 28PT GE POE+ SMART SWITCH Guia Do Administrador

Configuration changes take place immediately.



Select the check box next to the instance to configure and update the values.

You can select multiple check boxes to apply the same setting to all selected MTS 
instances.

Click APPLY to send the updated configuration to the switch.

Configuration changes take place immediately.

To delete an MST instance, select the check box next to the instance and click DELETE.

The following table describes the information displayed on the screen for each configured 
MST instance.

Bridge Identifier

The bridge identifier for the selected MST instance. It is made up using the bridge priority 
and the base MAC address of the bridge.

Time Since 
Topology 
Change

Displays the total amount of time since the topology of the selected MST instance last 
changed. The time is displayed in hour/minute/second format, for example, 5 hours, 10 
minutes, and 4 seconds.

Topology 
Change Count

Displays the total number of times topology has changed for the selected MST instance.

Topology 
Change

Indicates whether a topology change is in progress on any port assigned to the selected 
MST instance. The possible values are True and False.

Designated Root Displays the bridge identifier of the root bridge, which is made up from the bridge priority 

and the base MAC address of the bridge.

Root Path Cost

Displays the path cost to the designated root for this MST instance.

Root Port

Indicates the port to access the designated root for this MST instance.

Use the MST Port Configuration screen to configure and display Multiple Spanning Tree 
(MST) settings on a specific port on the switch.



Select Switching 







 MST Port Configuration.