Netgear GS728TPP – 28PT GE POE+ SMART SWITCH Guia Do Administrador

To access the switch management interface, use one of the following methods:

From the Smart Control Center, select the switch and click Web Browser Access. For 
more information, see the documentation for this application at 

. 

Open a web browser and enter the IP address of the switch in the address field.

You must be able to ping the IP address of the NETGEAR switch management interface from 
your administrative system for web access to be available. If you used the Smart Control 
Center to set up the IP address and subnet mask, either with or without a DHCP server, use 
that IP address in the address field of your web browser. If you did not change the IP address 
of the switch from the default value, enter 192.168.0.239 into the address field. 

Clicking Web Browser Access on the Smart Control Center or accessing the switch directly 
from your web browser displays the Login screen.

To access the switch by using a web browser, the browser must meet the following software 
requirements: 

Internet Explorer version 7 or later 

Firefox version 4 or later 



Open a web browser and enter the IP address of the switch in the web browser address 

field. 

The factory default password is password. Type the password in the field on the Login 

screen and click Login. Passwords are case-sensitive.

After the system authenticates you, the System Information screen displays.