Netgear GS728TPP – 28PT GE POE+ SMART SWITCH Guia Do Administrador

The following screen displays:

 

From the ACL ID list, select an existing MAC ACL.

The packet filtering direction for ACL is Inbound, which means the MAC ACL rules are 
applied to traffic entering the port.

Specify an optional sequence number to indicate the order of this access list relative to other 

access lists already assigned to this interface and direction.

A low number indicates high precedence order. If a sequence number is already in use 

for this interface and direction, the specified access list replaces the currently attached 
access list using that sequence number. If you do not specify the sequence number, a 
sequence number that is one greater than the highest sequence number currently in use 
for this interface and direction is used. The valid range is 1–2147483647.

Click the appropriate orange bar to expose the available ports or LAGs. 

To add the selected ACL to a port or LAG, click the box directly below the port or LAG 
number so that a 

√

 appears in the box.

To remove the selected ACL from a port or LAG, click the box directly below the port 
or LAG number to clear the selection. An 

√

 in the box indicates that the ACL is 

applied to the interface.

Click APPLY to update the switch with the new settings.

Use the MAC Binding Table screen to view or delete the MAC ACL bindings.