Netgear GS728TPP – 28PT GE POE+ SMART SWITCH Guia Do Administrador

Select keyword other from the drop-down list, and specify the number of the port. 
The valid range is 0 - 65535.

Select one of the keywords from the list: DOMAIN, ECHO, FTP, FTPDATA, HTTP, 
SMTP, SNMP, TELNET, TFTP, and WWW. Each of these values translates into its 
equivalent port number, which is used as both the start and end of a port range.

Destination Prefix and Prefix Length. Enter a prefix of up to 128 bit combined with 
prefix length to be compared to a packet's destination IP address as a match criteria 
for the selected IPv6 ACL rule. The valid range for a prefix length is 0 - 128.

Destination L4 Port. Specify a packet's destination layer 4 port as a match condition 
for the selected IPv6 ACL rule. Destination port information is optional. Destination 
port information can be specified in two ways:

Select keyword other from the drop-down list, and specify the number of the port. 
The valid range is 0 - 65535.

Select one of the keywords from the list: DOMAIN, ECHO, FTP, FTPDATA, HTTP, 
SMTP, SNMP, TELNET, TFTP, and WWW. Each of these values translates into its 
equivalent port number, which is used as both the start and end of a port range.

IPv6 DSCP Service. Select the IPv6 DSCP service. If you prefer, you can select the 
Other option in the drop-down list and enter the numeric value of the DSCP in the 
adjacent field. The DSCP is defined as the high-order 6 bits of the service type octet 
in the IPv6 header. This configuration is optional. Enter an integer from 0 to 63. 

To add an IPv6 rule, select the global check box and click ADD.

To delete a IPv6 rule, select the checkbox of the rule you want to delete and click DELETE.

Click APPLY to submit the changes to the switch.  
Configuration changes take effect immediately.

When an ACL is bound to an interface, all the rules that have been defined are applied to the 
selected interface. Use the IP Binding Configuration screen to assign ACL lists to ACL 
Priorities and Interfaces. 



Select Security 



 ACL > Advanced 



 IP Binding Configuration.