Netgear GS728TPP – 28PT GE POE+ SMART SWITCH Guia Do Administrador
Configuration Examples
255
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
•
Packets leaving the switch are either tagged or untagged, depending on the setting for
that port’s VLAN membership properties. A U for a given port means that packets leaving
the switch from that port are untagged. Inversely, a T for a given port means that packets
leaving the switch from that port are tagged with the VLAN ID that is associated with the
port.
that port’s VLAN membership properties. A U for a given port means that packets leaving
the switch from that port are untagged. Inversely, a T for a given port means that packets
leaving the switch from that port are tagged with the VLAN ID that is associated with the
port.
The example given in this section describes a wide range of configurations to help provide an
understanding of tagged VLANs.
understanding of tagged VLANs.
Sample VLAN Configuration
This example demonstrates several scenarios of VLAN use and describes how the switch
handles tagged and untagged traffic.
handles tagged and untagged traffic.
In this example, you create two new VLANs, change the port membership for default
VLAN
VLAN
1, and assign port members to the two new VLANs:
1.
In the VLAN Configuration screen (see
82), create the
following VLANs:
•
A VLAN with VLAN ID 10
•
A VLAN with VLAN ID 20
2.
specify the VLAN membership as follows:
•
For the default VLAN with VLAN ID 1, specify the following members: port 7 (U) and
port 8 (U).
port 8 (U).
•
For the VLAN with VLAN ID 10, specify the following members: port 1 (U), port 2 (U),
and port 3 (T).
and port 3 (T).
•
For the VLAN with VLAN ID 20, specify the following members: port 4 (U), port 5 (T),
and port 6 (U).
and port 6 (U).
3.
specify the PVID for ports g1 and g4 so that packets entering these ports are tagged with
the port VLAN ID:
•
Port g1. PVID 10
•
Port g4. PVID 20
4.
This VLAN configuration produces the following results:
•
If an untagged packet enters port 1, the switch tags it with VLAN ID
10. The packet
has access to port 2 and port 3. The outgoing packet is stripped of its tag to leave
port 2 as an untagged packet. For port 3, the outgoing packet leaves as a tagged
packet with VLAN ID 10.
port 2 as an untagged packet. For port 3, the outgoing packet leaves as a tagged
packet with VLAN ID 10.
•
If a tagged packet with VLAN ID 10 enters port 3, the packet has access to port 1 and
port 2. If the packet leaves port 1 or port 2, it is stripped of its tag to leave the switch
as an untagged packet.
port 2. If the packet leaves port 1 or port 2, it is stripped of its tag to leave the switch
as an untagged packet.
•
If an untagged packet enters port 4, the switch tags it with VLAN ID 20. The packet
has access to port 5 and port 6. The outgoing packet is stripped of its tag to become
an untagged packet as it leaves port 6. For port 5, the outgoing packet leaves as a
tagged packet with VLAN ID 20.
has access to port 5 and port 6. The outgoing packet is stripped of its tag to become
an untagged packet as it leaves port 6. For port 5, the outgoing packet leaves as a
tagged packet with VLAN ID 20.