Netgear FS526Tv2 - 24-Port Smart Switch with Gigabit Ports Guia Do Utilizador
Manage Access Control Lists
212
ProSAFE FS526Tv2, FS726Tv2, and FS728TLP Smart Switches
Remove a Rule from a Basic IP ACL
To remove a rule from an IP ACL:
1.
Select Security > ACL > Advanced > IP Rules.
The IP Rules screen displays.
2.
From the ACL ID menu, select the ACL ID for which you want to remove a rule.
3.
Select the check box to the left of the rule that you want to remove.
4.
Click the Delete button.
The rule is removed from the Basic ACL Rule Table.
Manage Extended IP ACL Rules
You assign extended IP ACL rules to ACL IDs from 100 through 199. These rules specify
whether incoming traffic that matches the extended criteria is forwarded normally or
discarded. Extended criteria can include the type of protocol, source and destination IP
addresses, source and destination ports, and QoS service types.
whether incoming traffic that matches the extended criteria is forwarded normally or
discarded. Extended criteria can include the type of protocol, source and destination IP
addresses, source and destination ports, and QoS service types.
IMPORTANT:
The last rule of the IP ACL table is a default deny all IP traffic rule to
ensure that a packet is dropped if an ACL is applied to the packet
and none of the explicit rules match. (IP ACL rules have a higher
priority than MAC ACL rules.)
ensure that a packet is dropped if an ACL is applied to the packet
and none of the explicit rules match. (IP ACL rules have a higher
priority than MAC ACL rules.)
Create a Rule for an Extended IP ACL
To create a rule for an extended IP ACL:
1.
Select Security > ACL > Advanced > IP Extended Rules.
The IP Extended Rules screen displays. The following figure shows two entries in the
table as an example.
table as an example.