Netgear FS526Tv2 - 24-Port Smart Switch with Gigabit Ports Guia Do Utilizador

Configure the settings as described in the following table.

TLV Advertised 
Interval

The interval at which LLDP frames are transmitted. The default setting is 
30

 

seconds.

Enter a number in the range from 5 to 32768 seconds.

Hold Multiplier

The hold time multiplier in seconds. The hold time multiplier multiplies the transmit 
interval to define the Time to Live (TTL) period. The default setting is 4 seconds.

Enter a number in the range from 2 to 10 seconds.

Reinitialization Delay The delay in seconds before reinitialization. The default setting is 2 seconds. A 

longer time prevents frequent reinitializations.

Enter a number in the range from 1 to 10 seconds. 

Transmit Delay

The minimum transmit delay in seconds between successive LLDP frame 
transmissions. The default setting is 5 seconds.

Enter a number in the range from 5 to 3600 seconds.

Fast Start Duration

The number of LLDP protocol data units (PDUs) that are transmitted if the 
LLDP-MED Fast Start mechanism is initialized, which occurs when a new endpoint 
device links with the LLDP-MED network connectivity device. The default setting is 3.

Enter a number in the range from 1 to 10.

Click the Apply button.

The settings are saved.

(Optional) Click the Refresh button.

The screen refreshes to display the most current data.

By default, LLDP is enabled on all ports, allowing them to transmit and receive LLDP packets. 
You can change the advertisement mode or disable LLDP entirely, and configure whether the 
port advertises its management IP address, topology change notifications, and type-length 
values (TLVs).



Select System > LLDP > Advanced > LLDP Port Settings. 

The LLDP Port Settings screen displays. The following figure does not show all ports.