Netgear FS526Tv2 - 24-Port Smart Switch with Gigabit Ports Guia Do Utilizador

RADIUS server handles the authentication. If the visitor is successfully authenticated, traffic 
is automatically assigned to the guest VLAN. In this example, a VLAN has been configured 
with a VLAN ID of 150 and VLAN name of Guest.

Select Security > Port Authentication > Advanced > Port Authentication.

The Port Authentication screen displays.

Configure the following settings:

a. Select ports e1 through e8.

b. From the Port Control menu, select Auto.

The selection from the Port Control menu for all other ports on which authentication is 
not needed must be Authorized. If the selection is Authorized, the ports are placed 
unconditionally in a force-authorized state and do not require authentication. If the 
selection is Auto, the authenticator PAE sets the controlled port mode.

c. In the Guest VLAN ID field for ports e1 through e8, enter 150.

Ports e1 through e8 are assigned to the guest VLAN.

d. For all other port authentication settings, use the default values.

For more information about configuring port authentication, see 

(Optional) Select Security > Traffic Control > Port Security > Interface Configuration.

The Interface Configuration screen displays.

(Optional) Configure additional settings to control access to the network through the ports.

170.

Select Security > Port Authentication > Basic > 802.1x Basic Settings.

The 802.1x Basic Settings screen displays.

Configure the global port security settings:

For Port Based Authentication State, select the Enable radio button.

For Guest Vlan, select the Enable radio button.

For more information about the global port security settings, see 

170.

Select Security > Management Security > RADIUS > Server Configuration. 

The RADIUS Server Configuration screen displays.