Netgear FVS318Gv2 – ProSAFE VPN Firewall Series Manual De Referência
Firewall Protection
151
NETGEAR ProSAFE VPN Firewall FVS318G v2
3.
Click the Add table button under the Inbound Services table.
4.
Enter the settings as described in
In addition to selections from the Service, Action, and Log lists, you must make
selections from the following lists:
selections from the following lists:
•
WAN Destination IP Address
•
DMZ Users (This list is available only when the WAN mode is Classical Routing.
When the WAN mode is NAT, your network presents only one IP address to the
Internet.)
When the WAN mode is NAT, your network presents only one IP address to the
Internet.)
•
WAN Users
Unless your selection from the Action list is BLOCK always, you also must make
selections from the following lists:
selections from the following lists:
•
Select Schedule
•
Send to DMZ Server
The Translate to Port Number field is optional.
5.
Click the Apply button.
Your changes are saved.