Netgear FVS318Gv2 – ProSAFE VPN Firewall Series Manual De Referência
Firewall Protection
197
NETGEAR ProSAFE VPN Firewall FVS318G v2
By default, the source MAC address filter is disabled. All the traffic received from computers
with any MAC address is allowed. When the source MAC address filter is enabled,
depending on the selected policy, traffic is either permitted or blocked if it comes from any
computers or devices whose MAC addresses are listed in MAC Addresses table.
with any MAC address is allowed. When the source MAC address filter is enabled,
depending on the selected policy, traffic is either permitted or blocked if it comes from any
computers or devices whose MAC addresses are listed in MAC Addresses table.
For additional ways of restricting outbound traffic, see
To enable MAC filtering and add MAC addresses to be permitted or blocked:
1.
Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
login time-out, you are automatically logged out.
2.
Select Security > Address Filter.
3.
In the MAC Filtering Enable section, select the Yes radio button.
4.
In the same section, from the Policy for MAC Addresses listed below list, select one of
the following options:
•
Block and Permit the rest. Traffic coming from all addresses in the MAC Addresses
table is blocked. Traffic from all other MAC addresses is permitted.
table is blocked. Traffic from all other MAC addresses is permitted.