Netgear FVS318Gv2 – ProSAFE VPN Firewall Series Manual De Referência
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
Troubleshooting
392
NETGEAR ProSAFE VPN Firewall FVS318G v2
•
Make sure that the VPN firewall can provide IPv6 addresses to the computers on the
LAN.
LAN.
For more information, see
on page 78. Check the settings on the
LAN Setup (IPv6) screen, and if applicable for your type of configuration, on the RADVD
screen.
screen.
Check the computer:
•
Make sure that the operating system supports IPv6.
Normally, the following operating systems support IPv6:
-
Windows 7, all 32-bit and 64-bit versions
-
Windows Vista, all 32-bit and 64-bit versions
-
Windows XP Professional SP3 (32-bit and 64-bit)
-
Windows Server 2008, all versions
-
Windows Server 2008 R2, all versions
-
Windows Server 2003, all versions
-
Windows Server 2003 R2, all versions
-
Linux and other UNIX-based systems with a correctly configured kernel
-
MAC OS X
•
Make sure that IPv6 is enabled on the computer.
On a computer that runs a Windows-based operating system, do the following (note that
the steps might differ on the various Windows operating systems):
the steps might differ on the various Windows operating systems):
a. Open the Network Connections screen or the Network and Sharing Center screen.
For example, on the Windows taskbar, click Start, select Control Panel, and select
Network Connections.
Network Connections.