Netgear GSM7228PS - ProSAFE 28 ports Gigabit Ethernet L2 Managed Stackable Switch with PoE Manual Do Equipamento

GSM7328S Rear Panel

The rear panel has two module bays, a console port, redundant power supply connector, and 
a power module for the supplied power cord. 

The module bays support any combination of the following:

ProSafe 10-Gigabit Ethernet XFP Adapter (AX741)

10/100/1000M Ports 
(2 LEDs per port) 

Off: No link is established on the port. 

Solid green: A valid link is established on the port. 

Blinking green: The port is sending or receiving packets. 

Off: No link is established on the port. 

Solid yellow: A valid 10/100 Mbps link is established on the port. 

Solid green: A valid 1000 Mbps link is established on the port. 

Note: If port 21–24 media is changed to SFP, the RJ-45 LEDs change to OFF status. 

SFP Ports
(1Link/ACT LED per 
port) 

Off: No SFP module link is established on the port. 

Solid green: A valid 1000Mbps SFP module link is established on the port. 

Blinking green: Packet transmission or reception is occurring on the port at 

1000Mbps.

Solid yellow: A valid 100Mbps SFP module link is established on the port.

Blinking yellow: Packet transmission or reception is occurring on the port at 

100Mbps.

Note. If port 21–24 media is changed to copper, the SFP LEDs change to OFF 
status. 

SFP+ Ports
(1 Link/ACT LED per 
port)

Off: No SFP module link is established on the port.

Solid green: A valid 10Gbps SFP+ module link is established on the port.

Blinking green: Packet transmission or reception is occurring on the port at 

10Gbps.

Power receptacle

Console

Stacking/XFP/SFP+/CX4

Redundant
power supply

module bays

connector

Replaceable
power supply